DMV Practice Test Hub › Forklift › Parking and unattended trucks
Forklift test topic: parking and unattended trucks
4 test-style questions with the answer and the exact rule.
- When a powered industrial truck is left unattended, what specific actions must the operator take regarding the load engaging means and controls?Fully lower the load engaging means, neutralize the controls, shut off the power, and set the brakes. The rule requires fully lowering the load, neutralizing controls, shutting off power, and setting brakes when the truck is unattended.29 CFR § 1910.178(m): “When a powered industrial truck is left unattended, load engaging means shall be fully lowered, controls shall be neutralized, power shall be shut off, and brakes set.”
- According to the standard, under which specific condition is a powered industrial truck considered 'unattended'?When the operator is 25 feet or more away from the vehicle which remains in their view, or whenever the operator leaves the vehicle and it is not in their view. The regulation defines 'unattended' based on distance and visibility, specifically citing the 25-foot threshold or lack of visibility.29 CFR § 1910.178(m): “A powered industrial truck is unattended when the operator is 25 ft. or more away from the vehicle which remains in his view, or whenever the operator leaves the vehicle and it is not in his view.”
- When an operator dismounts a powered industrial truck and remains within 25 feet of the vehicle while keeping it in their view, what specific actions must be taken before leaving the immediate vicinity?The load engaging means shall be fully lowered, controls neutralized, and the brakes set to prevent movement. The regulation specifies that even when close enough to see the truck, the operator must lower the forks, neutralize controls, and set brakes to ensure stability.29 CFR § 1910.178(m): “When the operator of an industrial truck is dismounted and within 25 ft. of the truck still in his view, the load engaging means shall be fully lowered, controls neutralized, and the brakes set to prevent movement.”
- What is the required action when approaching and entering an elevator with a powered industrial truck?Approach slowly, enter squarely after leveling, neutralize controls, shut off power, and set brakes. The rule specifies a precise sequence: slow approach, square entry after leveling, and securing the truck by neutralizing controls, shutting off power, and setting brakes.29 CFR § 1910.178(n): “Elevators shall be approached slowly, and then entered squarely after the elevator car is properly leveled. Once on the elevator, the controls shall be neutralized, power shut off, and the brakes set.”